Part 3 - Preparing the case

Let's begin with the case.

  1. Unbox the keyboard and all related parts if not already done.
  2. Of the two supplied hex keys, use the larger one to unscrew the four weight screws.

    image-1593353441035.png

  3. Carefully remove the weight, and set aside.

    image-1593353464638.png

  4. Use the smaller of the two hex keys to unscrew the eight case screws.

    image-1593353491308.png

  5. Carefully remove the bottom case half, and set aside.

    image-1593353512755.png

  6. At this point, the case should be fully disassembled.
    Prepare the plate and adhesive gaskets.