Skip to main content

Part 5 - Putting it all together

  1. Prepare the prepared top-plate-PCB-switch assembly from the end of the previous page.
    Double-check that the temporary plate retention screws have been removed, and insert the bottom case half.

    If you plan to use the bottom foam layers, install them before inserting the lid. Our personal recommendation is one sheet to begin; adjust if necessary after testing.

    image-1600535769176.png

  2. Flip the board, and install the case screws.

    image-1600535848664.png

    image-1600535875018.png

  3. Install the keycaps of your choice, connect to a computer, and verify that it works.

Congratulations! You have fully assembled the Vega.

E5LkTKx.jpg

Now you are ready for the keymap editing and final remarks.remarks.