Skip to main content

Recently Updated Pages

Part 6 - Keymap editing and final notes

Keymap editing on the Andromeda is possible in just a few clicks. If you have a recent version o...

Part 4 - Assembling the internals

Prepare and tune the stabilizers needed for your preferred layout, if not done already.Prepare an...

Part 5 - Putting it all together

Connect the daughterboard cable into the USB daughterboard if not already connected together.Inse...

Part 3 - Preparing the case

Let's begin with the case.   Remove the components from the box if not already done. Of the tw...

Part 2 - Pre-build preparations

Before assembling the board, there are a few things to check. Check for any major external flaws...

Part 1 - Begin here

Thank you for your purchase! We’ve done our best to put in everything we know into this board....

Part 6 - Configuring the keymap

The key to getting the most out of your Polaris is to tune the keymap to your liking. Thankfully...

Part 4 - Installing switches and stabilizers

Prepare and tune the stabilizers you need for your planned layout.Prepare and lube the switches a...

Part 3 - Preparing the case

Let's begin with the case. Remove the components from the box if not already done. Of the two s...

Part 4 - Assembling the internals

Prepare and tune the stabilizers needed for your preferred layout, if not done already.Prepare an...

Part 1 - Begin here

  Thank you for your purchase! We’ve done our best to put in everything we know into this b...

Part 6 - Keymap editing and closing words

The key to getting the most out of your Vega is to tune the keymap to your liking.Thankfully, thi...

Part 5 - Putting it all together

Prepare the prepared top-plate-PCB-switch assembly from the end of the previous page.Double-check...

Part 2 - Pre-build preparations

Before assembling the board, there are a few things to check. Check for any major external flaws...

Section 1 - This mysterious custom keyboard thing

Written by ai03, last updated Oct 13 2020 In this quick series, I will cover everything you need...

Section 3 - Making the switch

The keyboard switch determines the typing experience - it controls the weight, feel, and sound of...

Section 2 - A case study

It’s difficult to make a keyboard decision without knowing what to look out for.    What’s in a...

Section 5 - The hunt for endgame

So you have an ideal board, ideal switches, and ideal keyset to buy. Yet looking them up yields O...

Section 4 - The capstone

So you’ve decided on a fancy case and planned out some comfy switches. But you aren’t going to ty...

Part 3 - Assembling the board

Let's begin with the case. Remove the components from the box if not already done. Use the supp...